Metal Fabrication in Scottsdale, AZ
Elevated Grounds fabricates and installs custom outdoor metalwork for homes and businesses in Scottsdale and Maricopa County. From entry gates, railings and decorative privacy screens to steel frames for shade structures and planters, every piece is built to fit your landscape, anchored on solid footings and finished to resist intense UV, heat and monsoon moisture.
CUSTOM OUTDOOR METALWORK
Metalwork Designed to Fit Your Landscape
Metal adds strength, security and a clean architectural edge to an Arizona yard. A custom gate frames your entry, a laser-cut privacy screen softens a long block wall, and a steel shade frame can span spaces that wood alone cannot. The key is designing metalwork as part of the landscape, so it lines up with walls, patios and planting instead of looking like an afterthought bolted on later.
Because Elevated Grounds also builds hardscape, structures and outdoor kitchens, our metal fabrication is planned alongside the rest of your project. Footings are set during hardscape work, finishes are coordinated with your home, and one team handles the installation. We have served Scottsdale since 2012 with 25+ years of experience, licensed, bonded and insured under Arizona ROC #361161, and we offer free estimates.
✓ Custom gates, railings and privacy screens
✓ Steel frames for pergolas and shade structures
✓ Finishes chosen to resist UV, heat and moisture
✓ Built to integrate with hardscape and block walls
✓ Licensed, bonded and insured – Arizona ROC #361161
ROC #361161
Scottsdale, AZ
WHAT WE FABRICATE
Outdoor Metal Fabrication Services
Our metal fabrication focuses on outdoor pieces that make a landscape more secure, more private and more distinctive. We help you choose a design, a profile and a finish that suit your home's architecture, whether that is clean modern lines, a rustic weathered look or a classic Southwest style. Every piece is measured on site so it fits the opening, the wall or the structure it belongs to, and is installed with anchors and footings sized for wind and monsoon gusts.
Custom Gates
We build pedestrian, side-yard and RV gates sized to your openings, with sturdy frames, quality hinges and latches, and infill options from solid panels to decorative patterns that match the style of your home.
Railings & Handrails
Railings add safety on steps, raised patios and elevated walkways. We fabricate clean, sturdy railings with secure posts anchored into hardscape or footings, finished to complement pavers, stone and your home's exterior.
Decorative Privacy Screens
Laser-cut and slatted metal panels add privacy and shade while still letting breezes through. They work well on block walls, around patios and to hide equipment such as pool pumps and AC units.
Steel Shade Frames
Steel frames support pergolas, shade sails and ramadas with longer spans and slimmer posts than many wood designs. We coordinate frame, footing and roof options so the structure handles summer sun and monsoon wind.
Planters & Edging
Metal raised planters and steel landscape edging create crisp lines between rock, turf and planting beds. They suit modern desert designs and hold their shape well where plastic edging tends to warp in the heat.
Fire Feature Accents
We fabricate metal surrounds, spark screens and accents that pair with fire pits and outdoor kitchens, finished for heat exposure and designed to sit cleanly on the paver or travertine surfaces around them.
Our Metal Fabrication Process
Custom metalwork needs accurate measurements, a clear design and careful installation. Our process keeps you involved at each stage, so the finished gate, railing or screen looks the way you pictured it and fits the opening, wall or structure exactly as planned on site.
01
Consultation & Site Measure
We visit your property, measure openings, walls and slopes, and talk through how the piece will be used, from daily gate traffic and pet safety to privacy, shade and the look you want.
02
Design & Finish Selection
We sketch the design, confirm dimensions and review finish options, explaining how each one handles UV, heat and moisture so you can choose a look that will hold up in the desert.
03
Estimate & Scheduling
You receive a written estimate describing the piece, materials and installation. We explain cost factors such as size, design complexity and finish, then schedule fabrication around the rest of your project.
04
Footings & Preparation
We prepare the site, set posts or footings and coordinate with any hardscape or wall work, making sure anchors are plumb, level and sized for wind and monsoon gusts before installation day.
05
Fabrication & Finishing
The piece is cut, assembled and welded to the approved design, then cleaned and finished. Careful surface preparation before finishing helps the protective coating last longer under intense Arizona sun and heat.
06
Installation & Walkthrough
We install and adjust the finished piece, check gate swing and latches, confirm railings are solid and walk through it with you, sharing simple care tips to keep the finish looking good.
25+ Years
How it works
Why Choose Elevated Grounds for Metal Fabrication
Metalwork looks best when it is designed with the space around it. Because we also design landscapes and build patios, walls and shade structures, we plan gates, railings and screens so they line up with hardscape, block walls and planting beds instead of fighting them. Our motto, Designed to Distinguish, Built to Endure, shows in the details: accurate measurements, solid anchoring, smooth operation and finishes chosen for how they actually perform in the Sonoran Desert sun. We test every gate swing and latch before we consider the job finished.
We are a family-owned company with 25+ years of experience, licensed, bonded and insured under Arizona ROC #361161, serving residential and commercial properties across Maricopa County. Reliable service means clear communication from your first sketch through installation, with one team responsible for the finished piece. Call (480) 338-3377 any time, 24/7, to request a free estimate. We accept Visa, Mastercard, Amex, Discover, Apple Pay, Zelle and wire transfer for your convenience, and we review every design detail with you before fabrication begins.
Why add custom metalwork to an Arizona landscape?
Custom metalwork adds security, privacy and architectural interest that plants and stone alone cannot provide. Gates and railings make a yard safer, decorative screens hide equipment or neighbors, and steel frames allow open shade structures with longer spans. Built to fit your space, metal ties the whole design together.
Common uses in Maricopa County yards
- Side-yard and RV gates sized for wider openings and heavy use.
- Privacy panels mounted on block walls to screen patios and pools.
- Equipment enclosures that hide pool pumps, AC units and trash bins.
- Railings on steps, raised patios and elevated walkways.
- Steel edging that keeps rock and turf neatly separated.
Which metal finish lasts longest in the desert?
The longest-lasting finishes start with careful surface preparation and a coating designed for outdoor UV exposure. Lighter colors tend to stay cooler and show fading less, while weathered or rust-patina looks embrace natural change. The right choice depends on style, placement and how much upkeep you want.
- Coated finishes: clean, uniform color; touch up chips promptly.
- Patina looks: natural rust tone that suits rustic desert designs.
- Light colors: reflect more sun and stay cooler to the touch.
How do monsoon storms affect metal structures?
Monsoon storms bring strong gusts, blowing dust and sudden rain. Gates, screens and shade frames need solid anchoring so wind cannot rack or loosen them, and finishes should be intact so water does not reach bare metal. We size footings and fasteners for these conditions and grade around posts so water drains away.
How do you care for outdoor metalwork?
Rinse dust off a few times a year, check hinges and latches, and touch up any chips or scratches before moisture reaches bare metal. Keep sprinklers from spraying gates and screens, since hard water leaves spots and encourages corrosion. A quick inspection after monsoon season catches small issues early.
- Rinse dust and debris with a gentle spray.
- Lubricate gate hinges and latches as needed.
- Touch up chips with matching finish.
- Adjust irrigation heads away from metal surfaces.
- Check anchors and fasteners once a year.
How does metal fabrication work with other outdoor projects?
Metal pieces often connect to other parts of the yard, so planning them together saves time and avoids rework. Steel frames support pergolas and other outdoor structures, railings attach to steps built during hardscaping, and metal accents can surround features from our water and fire elements service.
Is metal or wood better for desert gates and screens?
Metal generally holds its shape better in dry heat, where wood can crack, warp and fade. Metal also resists termites and allows slimmer profiles. Wood offers natural warmth, and some designs combine both, using a metal frame with wood slats. We help you weigh appearance, upkeep and durability for your property.
We serve Scottsdale and nearby communities including Maricopa.
Common questions
Frequently Asked Questions
Considering a custom gate, railing or decorative screen for your property? These answers cover the questions Scottsdale homeowners ask most about outdoor metal fabrication, finishes, durability in desert heat and how installation works.
What outdoor metal pieces can you fabricate?
We fabricate custom gates, railings, handrails, decorative privacy screens, steel frames for pergolas and shade structures, metal planters, landscape edging and accents for fire features and outdoor kitchens. Each piece is designed to fit your space and installed by the same team that builds your landscape and hardscape.
How does metal hold up in Arizona heat and sun?
Metal is very durable outdoors, but finish quality matters. Intense UV can fade and chalk coatings, and monsoon moisture can cause rust where a finish is damaged. We prepare surfaces properly, choose finishes suited to desert exposure and recommend simple periodic touch-ups to keep pieces looking good.
Can you match metalwork to my existing gate or fence?
In many cases, yes. We measure your existing pieces, review the profile, spacing and finish, and design new metalwork to match or complement them. Exact matches depend on the original materials and how much they have weathered, which we discuss during the consultation.
Do you install metal gates on block walls?
Yes. We install gates on block walls and pilasters using anchoring methods suited to the wall construction, or set new posts and footings where needed. We check that the opening is plumb and adjust hinges and latches so the gate swings smoothly and closes securely.
What affects the cost of custom metal fabrication?
Main cost factors include the size of the piece, design complexity, the amount of decorative detail, finish type, whether new footings or posts are needed, site access and installation height. We provide a free estimate after measuring and reviewing your design ideas so you can compare options.
Can metal fabrication be part of a larger landscape project?
Absolutely. Many clients add gates, railings or screens as part of a full backyard build. Planning everything together lets us set footings during hardscape work, run conduit for lighting and coordinate finishes with pergolas, outdoor kitchens and fire features for a unified look.